Get Connected With Us

Super-Six Mesh Panel

QuickDefence™ Super 6 Mesh Panel is manufactured to the same specification as our standard 358 Mesh Panel but with the improvement of 6mm nominal vertical wires.

This offers additional strength and impact resistance by substantially increasing the rigidity of the panel, thus offering more protection at an economical price.

  • Extra panel strength due to increased wire diameter
  • Anti-climb and anti-cut panel
  • Available in both flat and profiled panels

  • Critical infrastructures
  • Railways
  • Sea ports
  • Airports
  • Utility and nuclear power plants Etc.

Mesh Pattern: Standard mesh panels are manufactured from 4mm nominal horizontal wires and 6mm vertical wires with a mesh pattern of 76.2mm (3″) between vertical wire centres x 12.7mm (1/2″) between horizontal wire centres.

Profiles: Our standard product comes with 2 horizontal profiles, 1 each in the superior and inferior parts of the panel, each measuring approximately 85mm in height and 30mm in dimension width.

Panel Height: Variable up to 12m (40 feet) as one single panel. (Inverted panels available up to 2.5m).

Panel Width: Standard panel widths are 2518.6mm. Also available variable up to 3.66m (12 feet).

Welding Specification: Resistance welded at each intersection with a 400 to 550 N/mm² minimum and weld shear resistance is 75% of the tensile strength (EN 10223-4).

Panel Coating Finish: Made from pre-galvanized steel wire, with optional powder coating. Also available made in Galfan for additional robustness for adverse environmental conditions. Can be manufactured in Stainless steel if required.

Panel Weight: Approximately 9 kgs / m².

Panel Tolerances: Flatness : +/- 50mm clear of surface laid flat. Squareness: +/- 0.2% of nominal panel size. Dimension: +/- 10mm.

TOP